Hongkong Yaning Purification industrial Co.,Limited
Manufacturer of Clean room equipment for more than 19 years, Product quality is flawless, and customer service has no complaints.
Add to Cart
1). The boiler filter is adopted Aromatic polyamide synthetic fiber in form of non-woven. It is featured with low air resistance, good air permeability, stable performance, excellent chemical resistance.
2). Stable performance: High temperature synthetic filter media can be used at 220°C without aging. The contraction percentage is just 1% at 250°C with excellent size stability. There is no contraction, no embitterment, no softening or melting at 300°C. Heat resistance filter media can be decomposed at above 370°C and carbonized at about 400°C.
3). Excellent flame retardance, no self-ignition, no oxidizing, with self-extinguishing, no melting drops, little mist, natural carbonizing when flamed.
The high-temperature hepa filter uses a baffle design. The corrugated baffle can accurately maintain the spacing between the folds and maximize the use of filter paper with minimum resistance. The high-temperature hepa filter material has 180 folded pleats on both sides to form a pleated fold. When the filter is bent, there are two indentations, making it a pleated box fold at the end of the separator. Pleat prevents damage to the filter material.
1) Type: stainless steel frame, aluminum partition.
2) Filter: Ultra-fine glass fiber paper
3) Sealant: High-temperature resistant silicone
4) Seals: glass fiber, special glue (kseries)
5) Instant maximum temperature up to 400 degrees and constant temperature up to 250 degrees
1. The unique frame design of 1.5-2.00mm stainless steel frame increases the overall strength.
2. 0.03mm aluminum foil diaphragm arc groove peak not only can protect the filter paper from damage, reduce the wind speed evenly through the resistance.
3. High-quality glass fiber filter paper 4mm increase the filter are and dust-holding capacity, large resistance and low filtration efficiency.
4. One-component adhesives are used at a high temperature of 260°C for a long time, and temperature-resistant sealing tapes prevent leakage.
5, glass fiber filter, high temperature resistant special rubber gasket.
6, high temperature and high efficiency filter for instantaneous maximum temperature up to 300 degrees, the temperature up to 260 degrees, stable and reliable performance.
| Model | Size(mm)(W*H*D) | Rate air flow(m/h) | Initial pressure drop (Pa) | efficiency % 0.3u(DEHS) |
| YN-HHF320 | 320*320*220 | 400 | ≤220 | ≥99.99% |
| YN-HHF484 | 484*484*220 | 1000 | ||
| YN-HHF610A | 610*610*150 | 1000 | ||
| YN-HHF630 | 630*630*220 | 1500 | ||
| YN-HHF915 | 915*610*150 | 1500 | ||
| YN-HHF610B | 610*610*290 | 1800 | ||
| YN-HHF1220 | 1220*610*150 | 2000 | ||
| YN-HHF1260 | 1260*630*220 | 3000 | ||
| Note | Deep pleat hepa filter can be customized according to the site. | |||
Application
The boiler filter is widely used in ovens or other place which is high temperature. Not only for dust extraction, but also for avoid chemical erosion and against poisonous gas
