Hongkong Yaning Purification industrial Co.,Limited
Manufacturer of Clean room equipment for more than 19 years, Product quality is flawless, and customer service has no complaints.
Add to Cart
Sampling booth is a kind of partial purifying equipment for filling, refilling, weighing and sampling of raw material and compounds. It is provided with HEPA filter, which prevents the airborne dusts by down draught technique. The unit eliminates powder contamination to protect the operator and the surrounding environment.
Widely used in electronics, light sources, precision instruments, instruments, microbiology, agricultural seed cultivation research, food, processing and other industrial sectors and scientific experimental sites, have a good effect on improving process conditions, improve product quality and yield.
Cleanliness: Class 100 @ ≥ 0.5um (US Federal Standard 209E)
1), wind speed: 0.2 ~ 0.5m / s (** wind speed 0.3m / s)
2). Noise: ≤62dB(A)
3), power supply: AC220V, 650HZ
4). Vibration Half-peak value: ≤5um
5), the maximum power consumption: ≤ 0.8KW
6), weight: 50-150kg
>Create a partial clean grade class A area
>Negative pressure to prevent the cross infection or make harm to the operator
>Three level filter to make sure the filter efficiency
>Frequency-converting control to ensure the air velocity stable
>With touch screen to check the working condition
>PLF screen to ensure air flow no turbulence
>Customized design is welcome.
1).Clean sampling vehicle moved to where sampling is required, fixed sampling vehicle (brake).
2). Turn on the power, turn on the power switch, turn on the fan switch, the fan starts to work, adjust the voltage to the appropriate (usually 220V), and put the sampling barrel after the clean sampling vehicle is running for 15 minutes.
3). After the sampling is completed, remove the sampling bucket, turn off the fan and power supply, unplug the power cord, and move the sampling vehicle to its original position.
Note: According to the use conditions, the anemometer should be used to measure the wind speed in the working area regularly. If it is found that the technical requirements are not met, the air volume of the fan can be adjusted. If necessary, replace the high efficiency or primary efficiency air filter.
| Model | YN-980(B) (Steel plate coating) | YN-980 |
| Cleanliness | · 10000 class≥0.5μm(USA Federal Standard 209E) | · 10000 class≥0.5μm(USA Federal Standard 209E) |
| Air Velocity | 0.25-0.6m/s | 0.25-0.6m/s |
| Noise | ≤58dB(A) | ≤58dB(A) |
| Power | AC,Single phase 220V/50Hz | AC,Single phase 220V/50Hz |
| Max Power Dissipation | 0.37kW | 0.37kW |
| Normal working conditions | 5℃～40℃ Relative humidity:≤80% | 5℃～40℃ Relative humidity:≤80% |
| Barometric pressure | 86～106KPa | 86～106KPa |
| External dimension | 700*900*1900 | 700*900*1900 |
| Wind speed adjustment | Wind speed 5 adjustable | Wind speed 5 adjustable |
