Hongkong Yaning Purification industrial Co.,Limited
Manufacturer of Clean room equipment for more than 19 years, Product quality is flawless, and customer service has no complaints.
Add to Cart
One-stop Integrated Of Hospital Operating Room OR Operation Theatre Room
①The steel structure operating room is made of 1.2mm rust-proof and environmentally friendly electrolytic steel plate or stainless steel plate, and is lined with high-strength fire- resistant gypsum board or calcium silicate board. The installation methods include prefabricated hanging plate type and post-installation spray painting type. It has the effects of firm installation structure, rust resistance, scrub resistance, sound insulation and heat preservation.
The raw materials are all finished products produced and processed by the original factory that meets the national standards. All seams are sealed with anti-aging weather-resistant glue. The four connecting corners of the operating room are all processed into R300 arc or octagonal bevel, so that the wall, the ceiling is in an airtight state, and its service life can reach more than ten years.
Steel structures are widely used in many hospitals, pharmaceutical factories and top laboratories in Europe, America and Japan, and have now become one of the more mature wall decoration materials for operating rooms and clean rooms.
②Glass has many advantages as a wall panel in the operating room. It is resistant to cleaning, wiping and disinfection, acid and corrosion resistance, no dents, good ornamental surface, and smooth surface.It is more inline with the requirements of cleanliness, and the glass color inkjet can relieve the work pressure of medical staff, eliminate the tension of patients, and meet the requirements of humanized design.
The raw materials are all finished products produced and processed by the original factory that meet the national standards. All seams are sealed with anti-aging weather-resistant glue. The four connecting corners of the operating room are all processed into R300 arc or octagonal bevel, so that the wall,the ceiling is in an airtight state, and its service life can reach more than ten years.
The glass operating room sets the benchmark for innovative and cutting-edge operating rooms, improves the visibility of the hospital, and generates good economic benefits. The glass operating room meets high-standard purification requirements, minimizes infection, and improves the success rate of patient operations. The operating room wall panels are spliced with composite modules, and the whole is produced in the factory, without welding on site, without galvanized keel.
| Product Parameter | |||
| Product Name | Specifications | Surface Color | Recommended for Area |
| Stainless steel board | Surface layer 0.8mm/1.0mm/1.2mm | Optiona | Central supply room, Operating room and other clean areas |
| Electrolytic steel board | Surface layer 1.2mm/1.5mm | Optiona | Clean areas such as operating room and ICU |
| Inorganic pre-coated board | Surface layer 5mm/6mm | Optiona | Corridor,ICU and other clean areas |
| Anti-Bite board | Surface layer 3mm/4mm | Optiona | Corridor,ICU and other clean areas |
| Glass panel | Surface layer 6mm/8mm/10mm | Optiona | Corridor, Operating room and other clean areas |
Detailed Materials for Operation Room
Laminar Flow Ceiling
Laminar air supply ceiling is a non-inductive air supply device centrally arranged above the operating table in the clean operating room of a modern hospital. It is the purification air supply terminal of clean operating room and laminar flow ward. It has high-efficiency filtration, flow equalization and airflow compensation.
The cabinet is made of electrolytic steel plates, the high-efficiency filter is laid out in a tiled arrangement, which fully guarantees the laminar flow area of the ceiling filter to achieve a higher cleaning effect; at the same time, the filter can be put at side according to customer needs, providing HVAC designers with a variety of options.
Medical Scrub Sink
Stainless steel scrub sink, also known as stainless steel hand washing
sink, belongs to the flowing water hand washing and disinfection
equipment, is convenient for medical staff to use, can provide cold and
hot water at the same time, equip with timing device, faucet adopt 0.1μm
ultrafiltration membrane to ensure the water quality meets Chinese
GB5749 standard.
Medical Cabinets
Medical cabinets can be used by medical staff. According to the reasonable regulations of sorting and management classification, all items can be stored in designated medical cabinets. The material is 0.8mm -1.2mm thick SUS304 stainless steel. The structure is firm, eliminating dead ends, easy to clean, easy to use and beautiful in appearance.
Medical Airtight Manual Automatic Swing Door
Stainless steel scrub sink, also known as stainless steel hand washing sink, belongs to the flowing water hand washing and disinfection equipment, is convenient for medical staff to use, can provide cold and hot water at the same time, equip with timing device, faucet adopt 0.1μm ultrafiltration membrane to ensure the water quality meets Chinese GB5749 standard.
Success case show